Qualstar XLS Series Installation Manual page 102

7.2 Installing the Rack into the XLS-832700
6. Insert the pin through the loop on the lanyard to secure the rack to the frame.
See
Figure 7-9 Attaching the lanyard to the frame
7. Insert the pin on the right side of the frame through the lanyard on the right side
of the rack.
To avoid equipment damage, do not install hardware into the rack
unless both lanyards are attached to the frame.
8. Secure the rack in place by inserting the right hinge latches into the holes on the
frame.
To avoid equipment damage and possible injury, ensure that all four
hinge latches are completely inserted into the holes on the frame.
9. Follow the instructions in
and rack equipment.
7-8
Figure 7-9.
Section 7.4 on page 7-11
CAUTION
CAUTION
to install the power strip
501601 Rev. 07-01-19