Qualstar XLS Series Installation Manual page 173

2. Select View/Edit Network Configuration. The View/Edit Network
Configuration page opens, as shown in
Figure 11-22 View/Edit Network Configuration page
3. If you want to change the name for the physical library, enter a new name in the
Library Hostname field.
– If your network uses static IP addresses, the name will be displayed in
4. As required, enter information for the IP Address, Subnet Mask, and Default
Gateway fields.
Important:
5. As multicabinet installations, enter information for the IP Address and Subnet
Mask fields
6. Press Save Changes to save the information.
7. If you changed the IP address for the library, redirect the Internet browser to the
new address.
XLS Library Installation Manual
X-Link, but you must update the dynamic domain name system (DNS) on
your network to make the library name available to the network.
If you change the IP address, you must direct your
browser to the new address after exiting this page.
11
Configuring the Physical Library
Figure 11-22.
11-27