Qualstar XLS Series Installation Manual page 52

3.2 Unpacking the XLS
XLS-820500 or XLS-812300
1. Locate the two shipping restraints attaching the back of the LRM to the pallet.
See
Figure 3-10 Location of the back shipping restraints
2. Using a 5/16-inch hex wrench (included in the accessory box), remove the
shipping restraints.
3. To remove the two front shipping restraints, follow these steps:
a.
b.
Figure 3-11 Location of a front shipping restraint (right side shown)
c.
3-10
Figure 3-10.
Shipping restraints
Open the door.
Locate the right side shipping restraint behind the door. See
Remove the shipping restraint.
Figure 3-11.
Shipping restraint
501601 Rev. 07-01-19