Qualstar XLS Series Installation Manual page 185

11.6.3 Viewing and Editing SNMP Settings
This section describes how to view and edit the Simple Network Management Protocol
(SNMP) settings for the physical library. Data from the SNMP agents, contained in a
Management Information Base (MIB), helps in managing the network by showing
whether all devices are operating properly.
To view or edit SNMP settings for the physical library, follow these steps:
1. Access the Settings & Policies portlet as described in
11-36.
2. Select View/Edit SNMP Settings. The View/Edit SNMP Settings page opens,
as shown in
Figure 11-34 View/Edit SNMP Settings page
3. Enter a name for the SNMP community in the Community Name field.
4. Press Save Changes to save the information.
11.6.4 Viewing and Editing Event Log Settings
This section describes how to view and edit the event log settings. The XLS uses these
settings to determine when to automatically delete entries in the event log.
Note: Refer to the XLS Library User's Guide to learn how to delete events manually.
Depending on the values specified, the library deletes events when:
• The number of events in the log exceeds the maximum number specified
• The age of the events in the log exceeds the time period specified
XLS Library Installation Manual
Figure 11-34.
11
Configuring the Physical Library
Section 11.6.1 on page
11-39