Qualstar XLS Series Installation Manual page 174

11.5 Entering Configuration Information
11.5.3 Entering Contact Information
This section describes how to view and edit contact information for the physical library.
The primary and secondary contacts are typically responsible for the department or
division that manages the XLS library.
Important:
To view or edit contact information for the physical library, follow these steps:
1. Access the Configuration portlet as described in
2. Select View/Edit Contact Information. The View/Edit Contact Information
page opens, as shown in
Figure 11-23 View/Edit Contact Information page
3. View or edit the contact information for the library. Required fields are denoted
by an arrow.
4. Press Save Changes to save the information.
11-28
The information listed for the Primary and Secondary
Contact Information fields is for display purposes only.
The XLS does not use this information. If you want the
contacts listed to receive e-mail or pager alerts, be sure
to define them as library users. See the XLS Library
User's Guide for more information.
Figure 11-23.
Section 11.5.1 on page
501601 Rev. 07-01-19
11-25.