Qualstar XLS Series Installation Manual page 62

4.3 If you are not installing a MEM, turn all four jam nuts clockwise until they push up against the frame. See
6. If you are installing a MEM, refer to
or
4.3 If you are not installing a MEM, turn all four jam nuts clockwise until they push up
against the frame. See
Figure 4-5 Tightening a leveling foot
4.4 Releasing the Carousel Locks in a XLS-8161100
The carousels in the XLS-8161100 are locked into place for shipping.
You must release the carousel locks before installing the LRM.
To release the carousel locks, follow these steps:
4-4
Chapter 5, "Installing a MEM."
Figure 4-5.
Turn jam nut until
it pushes against
the frame
CAUTION
501601 Rev. 07-01-19