Qualstar XLS Series Installation Manual page 208

13.4 Installing Cartridges in Cartridge Slots
• MEM. The carousel of the XLS-89000 MEM include storage slots for 1,075
cartridges while the XLS-85000 has 535 cartridge slots.
Important:
To install the cartridges, follow these steps:
1. For each logical library, obtain the inventory report(s) for the logical library. See
Section 12.3, "Viewing the Inventory Report," on page
2. Open the library doors.
Important:
3. Refer to the labels within the library or to the figures in
Addresses,"
report with the cartridge locations in the LRM and MEM.
4. Ensure that the write-protect switches are to the left, then insert the cartridges
into the slots.
Important:
5. As required, install cleaning cartridges for each logical library partition. Refer to
the software documentation for any special requirements for cleaning cartridges.
Important:
6. Close any open doors.
13-6
The bottom three rows of storage slots on MEM's are
manually inaccessible and tape cartridges must be
loaded using the robotic handler and the Move Media
option of an attached LRM.
The library's power can remain on when you insert the
cartridges.
to associate the cabinet, column, and row addresses on the inventory
Be sure to insert the cartridge all the way into the slot.
Do not install cartridges in the I/O port slots or the tape
drives.
12-11.
Appendix A, "Library
501601 Rev. 07-01-19