Installation Check List - Qualstar XLS Series Installation Manual

2.2 Installation Check List

2.2 Installation Check List
After the XLS order is placed, Qualstar builds the library to the requested specifications
and preinstalls the drive bays, cartridge slots, I/O ports, Host Bus Adapters (HBAs), and
the power supplies. The equipment rack (if ordered), the tape drive assemblies, and the
cartridges must be installed at the customer's site.
Table 2-1 provides an annotated check list of XLS components, options, and accessories,
so you can ensure all required parts are available before starting the installation.
4
Item
LRM
MEM
Expansion pods
Tape drive assemblies
Drive filler assemblies
Terminators for SCSI tape
drives
Equipment rack (optional)
Equipment-rack hardware
(8U rack only)
I/O port magazines and covers Qualstar
Power cord
Door keys
Stylus for touch screen
Calibration cartridge
Table 2-1 Installation check list
2-4
Provided
by
Built and pre-tested to customer specifications; includes
variable number of drive bays, cartridge bays, I/O ports,
Qualstar
power supplies, and HBAs. May include additional
cartridge storage areas behind the front panel and doors.
As an option, one or two XLS-85000 or XLS-89000
MEMs can be attached to the XLS-8161100,
Qualstar
XLS-832700 or XLS-820500. One or two XLS-85000
MEMs can be attached to the XLS-812300.
As an option, one or two expansion pods can be
Qualstar
attached to the XLS-812300.
The tape drives are installed in drive carriers at the
Qualstar
factory and are shipped separately.
All unused tape drive locations require drive filler
Qualstar assemblies, which are installed in the library before
shipping.
The accessory box includes a terminator for each SCSI
Qualstar
tape drive.
An equipment rack can be ordered as an option and
Qualstar
must be installed in the field.
The mounting hardware for the optional 8U rack must be
Qualstar
installed in the field.
The accessory kit includes a magazine for each I/O port.
Additional I/O port magazines and covers are available
for long-term cartridge storage.
The accessory kit includes the appropriate power cord
Qualstar
for the input voltage and current.
The accessory kit includes keys to lock the doors. The
Qualstar
same key locks all doors.
The accessory kit includes a stylus that you can use to
Qualstar
control the touch screen.
The accessory kit includes a calibration cartridge, which
Qualstar
is required to calibrate the tape drive locations.
Notes
501601 Rev. 07-01-19