Logging Into X-Link - Qualstar XLS Series Installation Manual

10.3 Logging Into X-Link

Table 10-4
PWR Good
On (green)
On (green)
Table 10-4 Meaning of the power supply status LEDs
10.3 Logging Into X-Link
Figure 10-10
screen or a standard computer keyboard.
Figure 10-10 Log-in page
To log into X-Link, follow these steps:
1. If you are using a standalone computer, confirm that it is connected to one of the
library's Ethernet ports and that it has been configured to access the library. For
instructions, see
10-12
lists the meanings of the LEDs.
LED state
On (yellow)
Off
Off
shows the X-Link log-in page. You can log into X-Link using the touch
Section 11.1 on page
Meaning
Fault
Off The power supply is operating correctly
The power supply is on, but it is not
providing power to the XLS
The power supply has failed and needs
On
to be replaced
The power supply has failed and needs
Off to be replaced, or the library is powered
down
11-1.
Keyboard
button
501601 Rev. 07-01-19