Equipment Rack - Qualstar XLS Series Technical & Service Manual

2
About the XLS
2.2.8

Equipment Rack

Shown in Figure 2-19 on page 2-21, the LRM includes space in the back for an optional
EIA 19-inch equipment rack installed in a vertical orientation (equipment installed on its
side). The rack can accommodate equipment up to 26 inches deep (66 cm). Installed
equipment could include a Fibre Channel switch or other ancillary equipment.
Two versions of the rack option are available. The 6U rack (10.5-inches) resides entirely
within the LRM cabinet. The 8U (14-inches) rack protrudes 3.5 inches beyond the rear of
the LRM cabinet. A 15-amp power strip with six grounded outlets and circuit breaker is
supplied with either equipment rack. This power strip must be connected to an external
power source.
Figure 2-19 Equipment rack option (6U rack shown in XLS-832700)
XLS Library Technical Service Manual 2-31