Qualstar XLS Series Installation Manual page 4

Disassembly procedure
1. Remove the door(s).
2. Remove the front panel.
3. Remove the external side panels.
4. Remove the internal subassemblies.
Items recyclable using conventional methods
• Aluminum: Front panel, exterior side and rear panels, robotics, cartridge and drive bays,
carousel and shroud panels
• Stainless steel: Robot guides
• Steel: Frames, fasteners
• Plastic: Windows, cartridge magazines, tape cassettes
• Copper: Internal wiring, motors, SCSI cables
• Paper: Manuals
Items requiring special disposal due to lead-based solder
• Printed circuit boards: Controller card, miscellaneous small printed circuit boards
Items that may have salvage or resale value
• Tape drives
• EMI line power filter
Qualstar is committed to the implementation of RoHS (Restriction of the use of certain
hazardous substances in electrical and electronic equipment) in accordance with the
European Directive. The compliance date is July 1, 2006, at which time Qualstar will
certify that its tape library products are compliant with the RoHS standard.
Qualstar tape libraries are classified as "Information Technology Storage Array Systems"
for which the RoHS Directive provides an exemption for lead solder until the year 2010.
Until Qualstar replaces lead-based solder with lead-free solder, affected subassemblies
must be disposed of appropriately.
The best source for service-related information is your system reseller. Alternately, you
can reach the Qualstar Technical Support Department at:
IV
Reduction of Hazardous Substances (RoHS)
Technical Support
Qualstar Corporation
1267 Flynn Road
Camarillo, CA 93012
Monday - Friday 7:00 AM. to 4:00 PM PST
Phone: (805) 416-7055
Toll Free: (877) 886-2758
After Hours
Phone: (805) 583-7744
option 4
E-mail: support@qualstar.com
E-mail: sales@qualstar.com
www.qualstar.com
501601 Rev. 07-01-19