Qualstar XLS Series Installation Manual page 213

9. When the I/O port scan has completed, select All Slots from the Fiducials section
of the page. Then, wait while the handler moves to and scans the fiducials on all
magazine slots (except the ones in the I/O ports).
Important:
10. When the magazine slot scan has completed, select Tape Drives from the
Fiducials section of the page. Then, wait while the handler moves the calibration
cartridge from slot G50 and inserts it into each tape drive.
11. When the tape drive calibration has completed, select Dump Database from the
Fiducials section of the page. The results page indicates which, if any, fiducials
remain unscanned. See
Figure 14-5 Results from Dump Fiducial Database option showing unscanned tape drives
12. If any of the fiducials display as unscanned, select the appropriate option as
follows:
– If magazine slots are unscanned, select Unscanned Slots
– If I/O port slots are unscanned, select I/O Ports.
– If tape drives are unscanned (as in the example above), select Tape Drives.
13. After all locations have been scanned, select Calibrate All to calculate the
positions of the fiducials.
XLS Library Installation Manual
Depending on the number of magazines in your library,
scanning all slots can take several hours.
Figure 14-5.
14
Scanning the Fiducials and Inventory
14-5