Qualstar XLS Series Installation Manual page 63

1. On the top of the LRM, locate the four socket-head cap screws, as shown in
Figure
Figure 4-6 Location of the carousel lock screws on the top of the LRM
2. Use a 3/8-inch Allen wrench to remove the four screws.
3. Store the screws in the four holes in the top of the LRM. See
Important:
4. Turn the carousels by hand to ensure that it rotates smoothly and without
encountering any obstructions. The carousel will be hard to turn.
Do not use the edges of the cartridge slots to turn a carousel.
XLS Library Installation Manual
4-6.
The four cap screws to remove.
The four cap screw storage holes.
Top of LRM
Be sure to store the screws in the top of the LRM; they
may be required later for service use.
CAUTION
4
Installing the LRM
Figure 4-6.
4-5