Qualstar XLS Series Installation Manual page 54

3.2 Unpacking the XLS
XLS-89000 or XLS-85000
1. Locate the shipping restraints attaching the left and right sides of the MEM to
the pallet. There are two on either side. See
Figure 3-13 Location of shipping restraints on MEMs (right and left sides shown)
2. Using a 5/16-inch hex wrench (included in the accessory box), remove the
shipping restraints from both sides.
3-12
XLS-89000
Shipping restraint
(right side)
Shipping restraint
(left side)
Figure 3-13..
XLS-85000
Shipping restraint
(right side)
Shipping restraint
(left side)
501601 Rev. 07-01-19