Installing An Equipment Rack - Qualstar XLS Series Installation Manual

7

Installing an Equipment Rack

This chapter provides instructions for installing the optional equipment rack in the
XLS-832700, XLS-820500, or XLS-812300. Shown in
accommodate standard 19-inch rack equipment, such as a Fibre Channel switch.
To avoid equipment damage, the total weight of the equipment
installed in the optional equipment rack should not exceed 120lbs
(54.4kg).
Figure 7-1 Back of XLS-832700 with the optional equipment rack installed
To install the rack hardware, refer to the following sections in this chapter:
To install...
8U rack hardware for XLS-832700
6U or 8U rack for XLS-832700
Rack for XLS-820500 or XLS-812300
Equipment rack power strip and equipment
Table 7-1 Instructions for rack hardware installation
XLS Library Installation Manual
Figure
CAUTION
Equipment rack
Refer to...
Section 7.1
Section 7.2 on page 7-5
Section 7.3 on page 7-9
Section 7.4 on page 7-11
7-1, the equipment rack can
7-1