Qualstar XLS Series Installation Manual page 184

11.6 Defining Other Library Settings and Policies
3. If you do not want the system to send e-mail alerts, select Do not send e-mail
alerts and go to step 4.
or
If you want to send e-mail alerts, select Send e-mail alerts and specify the
settings listed in
Field
Mail Server Hostname or IP
Address
Mail Server Port
Sender Name
Sender E-mail Address
Table 11-5 Settings for e-mail alerts
4. After specifying the e-mail settings, test them by following these steps:
a.
b.
c.
5. Press Save Changes to save the information.
11-38
Table 11-5.
Specify this information
The mail server's host name or IP address. This is the name of the
SMTP server that sends the e-mail alerts.
The port used by the mail server to send e-mail
The name that is to appear as the sender of the e-mail alerts (for
example, Qualstar XLS Library)
The e-mail address to which e-mail recipients can respond (for
example, XLS-Administrator@yourcompany.com)
Enter an e-mail address in the Test E-mail Recipient field. You may want
to use your own e-mail address, so you can verify that the test e-mail was
sent.
Press Test Settings.
Verify that a test message from the sender specified in the Sender Name
field arrived in the test e-mail account's mailbox. In some cases, you may
have to wait a few minutes to receive the test message.
501601 Rev. 07-01-19