Installing The Rack Into The Xls-832700 - Qualstar XLS Series Installation Manual

e.
Figure 7-5 Top left equipment-rack bracket
6. Attach the second upper bracket to the top right side of the frame.
7. Once the 8U rack hardware is installed, refer to
7.2

Installing the Rack into the XLS-832700

Do not install equipment into the rack before installing the rack into
the XLS. Otherwise, the rack may become too heavy to lift.
To install either a 6U or 8U rack into the XLS-832700, follow these steps:
XLS Library Installation Manual
Attach either of the upper brackets to the top left side of the frame with
three 1/4-20 socket-head cap screws, as shown in
7
Insert screws
Section 7.2
CAUTION
Installing an Equipment Rack
Figure 7-5.
to install the rack.
7-5