Releasing The Carousel Locks In A Xls-85000 Mem - Qualstar XLS Series Installation Manual

d.
Figure 5-8 Storing the screws in the bracket
Important:
5. Turn the carousel by hand to ensure that it rotates smoothly and without
encountering any obstructions. The carousel will be hard to turn.
Do not use the edges of the cartridge slots to turn the carousel.
5.4

Releasing the Carousel Locks in a XLS-85000 MEM

The carousel in the XLS-85000 MEM is locked into place for shipping.
You must release the carousel locks before installing the MEM.
To release the carousel locks, follow these steps:
XLS Library Installation Manual
Store the screws in the two holes on the front of each bracket. See
Figure 5-8.
Be sure to store the screws in the bracket; they may be
required later for service use.
CAUTION
CAUTION
5
Installing a MEM
5-7