Qualstar XLS Series Installation Manual page 194

12.2 Creating a New Logical Library
12.2.3 Completing the Create Logical Library Wizard
To complete the wizard, follow these steps:
1. Access the Logical Libraries portlet as described in
2. At the bottom of the logical libraries table, review how many XLS resources are
unassigned (cartridge slots, tape drives, and I/O ports). You can select from these
resources when you define the new logical library.
Important:
3. From the Administration list, select Create a New Library. The first Create
Logical Library page opens, as shown in
Figure 12-3 Create Logical Library page (step 1 of 3)
12-6
If fewer slots, I/O ports, or tape drives are available
than needed, you can delete or edit any existing logical
libraries to make the resources available.
Section 12.2.1 on page
Figure 12-3.
12-3.
501601 Rev. 07-01-19