To install the mounting hardware for the equipment rack, follow these steps:
1.
Attach either of the bottom brackets to the left side of the frame by inserting the
bracket's tab into the slot on the frame.
2.
Secure the bracket with three 6-32 Phillips screws, as shown in
Figure 7-2 Bottom left equipment-rack bracket
3.
Attach the second bottom bracket to the right side of the frame.
4.
Place the 8U extension block on top of the left and right brackets.
5.
Secure the extension block to the frame and to the left and right brackets, as
follows:
XLS Library Installation Manual
7
Installing an Equipment Rack
Figure
7-2.
Insert screws
7-11