Qualstar XLS Series Installation Manual page 72

5.4 Releasing the Carousel Locks in a XLS-85000 MEM
1. On the top of the MEM, locate the four socket-head cap screws, as shown in
Figure
1
Figure 5-9 Location of the carousel lock screws on the top of the MEM
2. Use a 3/8-inch Allen wrench to remove screws 1 and 4 as shown in
3. Gradually remove screws 2 and 3 as follows:
a.
b.
c.
4. Store the screws in the four holes in the top of the MEM. See
page
5-8
5-9.
2
Top of MEM
Loosen screw 2 a few turns.
Loosen screw 3 a few turns.
Repeat steps a and b until screws 2 and 3 can be removed from the top of the
MEM.
5-9.
3
4
Figure
Figure 5-10 on
501601 Rev. 07-01-19
5-9.