Qualstar XLS Series Installation Manual page 100

7.2 Installing the Rack into the XLS-832700
1. Locate the two plastic guide rails on the bottom of the rack and the four hinge
latches on the front. See
Figure 7-6 Guide rails and hinge latches
2. With the latches to the front, lift the empty rack into the rack space on the back
of the XLS. To avoid scraping the XLS's metal frame, be sure the plastic rails are
on the bottom, as shown in
Make sure
plastic rails are
to the bottom
Figure 7-7 Plastic guide rails on the bottom of the rack
7-6
Figure 7-6.
Guide rails
Hinge latches
Figure 7-7.
501601 Rev. 07-01-19