Qualstar XLS Series Installation Manual page 101
Tape libraries
Hide thumbs
Also See for XLS Series:
- Site planning manual (42 pages) ,
- Technical & service manual (366 pages)
Table of Contents
Advertisement
3.
Slide the rack into position by pulling up on the bottom left hinge latch and
pulling down on the top left hinge latch. See
Figure 7-8 Inserting the hinge latches into the frame
4.
Release the latches into the holes on the frame.
Ensure that both latches have fully released and that the hinges are
completely inserted into the holes on the frame.
5.
Locate the lanyard on the left side of the rack and the corresponding metal pin at
the back of the frame.
XLS Library Installation Manual
7
Figure
7-8.
CAUTION
Installing an Equipment Rack
7-7
Advertisement
Table of Contents
