Qualstar XLS Series Installation Manual page 148

11.1 Connecting the XLS to a Computer
• The primary Ethernet connector (ENET 0), located on the back of the power/PC
bay, is intended for remote operations across a 10/100 BaseT Ethernet network.
See
Figure 11-1 Location of the primary Ethernet connector
• The secondary Ethernet connector (the "service port") is intended for local service
operations with a laptop or other standalone computer. The service port for the
XLS-8161100 and XLS-832700 (see
cover. The service port for the XLS-820500 and XLS-812300 is located on the
power/PC bay.
Figure 11-2 Location of the service port on the XLS-8161100 and XLS-832700
11-2
Figure 11-1.
Figure 11-2) is located behind the air filter
Service
port
501601 Rev. 07-01-19