Qualstar XLS Series Installation Manual page 197

Note:
5. Press Next Step to continue creating the logical library.
When you press Next Step, the second Create Logical Library page opens, as
shown in
Figure 12-5 Create Logical Library page (step 2 of 3)
6. Enter the name and user ID of the person who is to administer the new logical
library.
Important:
7. Press Next Step to continue creating the logical library.
XLS Library Installation Manual
Section 8.1.3, "Recording Tape Drive Locations," on page 8-10
more information.
• To add a tape drive location (tape drive or empty slot), select the check
box next to the location.
• To remove a tape drive location (tape drive or empty slot), clear the
check box next to the location.
If a tape drive location is not shown, it has already been assigned to
another logical library.
Figure 12-5.
The information you enter in the Logical Library
Administrator fields is for display purposes only. The
XLS does not use this information. If you want the user
listed to have permission to perform administrator
tasks, you must define him or her as a library user and
assign him or her to the appropriate user group (see the
XLS Library User's Guide).
12
Setting Up Logical Libraries
for
12-9