Pos : 55.13 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/F eldbus koppler/Benutz er ver waltung und D ateis ys tem @ 8\mod_1279539371406_21.doc x @ 60443 @ 33 @ 1
15.6.3
User Management
Use the user management to change the preset passwords for the users guest, user
and admin or set the changed passwords back to the default.
Figure 52: User management (example)
Table 88: User management
Parameter/button
User
Password
[Change]
[Reset password]
Figure 53: Prompt to reset passwords
Manual
Version 2.2.0
Parameterization via WAGOframe
Description
Select a user whose password should be changed.
Enter a password for the selected user.
Only ASCII characters are permitted.
Save the new password for the selected user.
A dialog appears. Enter admin to confirm the new password and
click [OK].
Reset the password to the default state. This must be performed
by a superuser with a special password. Obtain the password
indicating the ID listed in the dialog for WAGO Support.
Ttl incremental/ssi encoder 2 encoder interfaces (2 x m12) + 4 digital inputs/outputs (2 x m12, 2 inputs/outputs per connector) for wago-speedway 767 (102 pages)