152
Parameterization via WAGOframe
15.4
Setting Up Network Manually
In order to work with the 767 components, the exact node structure topology must
be copied into the "Network View" of WAGOframe.
Setting up the network
Depending on the application, you can create the network manually (see this
section), automatically (see section "Set up network automatically" or using the
Life list (see section "Life list").
15.4.1
Adding the Communication DTM
So that you can parameterize the fieldbus coupler and the I/O modules connected
with it, establish a connection to your PC via the USB interface.
Access via ETHERNET
You can access WAGOframe also via ETHERNET (only 767-1201, -1301, -
2301). See section "Parameterization via WAGOframe" > "Service
Communication via ETHERNET".
1.
Right-click on "Network" in the "Network View" pane.
In the context menu, select Add.... The "Add..." dialog box opens.
2.
Figure 38: Adding the communication DTM (example)
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0