Gsdml File; Compatibility Of Fieldbus Couplers Version R3/R5 And The Gsdml Files - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
8.2

GSDML File

The GSDML file (Generial Station Description Markup Language) describes the
properties of the fieldbus coupler and I/O modules which are necessary for a
configuration, such as the characteristics or the parameter data. This file is
required to configure the IO Controller and the fieldbus coupler for the active data
exchange.
The GSDML file can be obtained at www.wago.com. When installing this file,
please refer to the information provided in the documentation of the configuration
software which you are using. The GSDML file is imported and installed from the
configuration software.
8.2.1 Compatibility of Fieldbus Couplers Version R3/R5 and the
GSDML Files
In addition to the functionality of the fieldbus coupler, the structure of GSDML
files has changed in version R5 compared to version R3. For fieldbus coupler
version R5, there is an R5 GSDML file created in accordance with the GSDML
standard version 2.25.
In principle, the R3 GSDML file can be used with a fieldbus coupler version R5.
However, there are some limitations as shown in the following table. An R5
GSDML file cannot be used with a fieldbus coupler version R3.
Manual
Version 2.2.0
Configuration 77