Snmp V3" View; Table 32: Parameter Description Of The Page "Snmp V3 - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
7.3.6

"SNMP V3" View

The SNMP V3 network characteristics are configured on this page.
1. To confirm your entries, click [SUBMIT].
To clear your entries, click [RESET].
2.
3. Your entries are not active until the software has been reset. To reset the
software, click on "Administration" in the navigation bar and then
[Software Reset].
Alternatively, reset the software be cycling the system power supply.

Table 32: Parameter description of the page "SNMP V3"

SNMP Configuration V3 (User)
Entry
1. User / 2. User
Security Protocol
Security Name
Security Key
Privacy Enable
Privacy Key
Notification/
Trap Enable
Notification
Receiver IP
Manual
Version 2.2.0
Value Description
Example)
Activating user 1 or 2

activate

Deactivating user 1 or 2

None 
None

MD5
 None

SHA1

None

Enter the name, if the "Security Protocol" MD5 or SHA1
SecurityName-x
has been selected.
Enter the password with at least 8 characters, if "Security
Security Key
Protocol" MD5 or SHA1 has been selected.
Activate the DES encryption of the data

DES

Deactivate the DES encryption of the data

Enter the password of at least 8 characters in the
Privacy Key
encryption with DES
Activate the notification traps of the SNMP version 3

V3 
Deactivate the notification traps of the SNMP

version 3
192.168.1.10 IP address of the notification manager
Commissioning
No encryption of the
MD5 SHA1
 
authentication
Encryption of the
MD5  SHA1

authentication with MD5
Encryption of the
MD5 SHA1 

authentication with SHA1
73