Ethernet Communication (Dtm Is Online); Figure 75: Network Setup - WAGO -SPEEDWAY 767 Manual
Profinet io fielbus coupler for wago-speedway 767
Hide thumbs
Also See for WAGO-SPEEDWAY 767:
Table of Contents
Advertisement
184
Parameterization via WAGOframe
Additional Information
Additional information is available in the section "Online and Offline
Parameterization".
15.6.7.3.3 ETHERNET Communication (DTM is online)
1
Double-click on the "WAGO TCP Speedway" communication DTM in the
"Network View" window. The DTM for the interface configuration opens.
2
Enter the IP address or IP address range of the 767 network and click
[Apply].
3
In "Network View", right-click on the "WAGO TCP Speedway". In the
context menu, select Scan > Set Up Network. All 767 components in the
specified IP address range are automatically added to the "Network View".
Figure 75: Network Setup
4
To set the parameters, right-click on the respective 767 components. In the
context menu select "Online Parameterization". The parameterization
interface opens with the parameters of the respective 767 components.
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0
Advertisement
Chapters
Table of Contents
