Figure 73: Selecting The Address Range - WAGO -SPEEDWAY 767 Manual

182 Parameterization via WAGOframe
Additional Information
Additional information (adding the I/O modules, etc.) is available in the section
"Manual Setup of the Network".
So that the DTM added in "Network View" (e.g. 767-2301) can communicate
with the physical fieldbus coupler, both DTMs must be linked to each other.
4 Enter the exact IP address or the IP address range of the 767 network under
"Address Range", so that the 767 components are recognized during the
network scan.

Figure 73: Selecting the Address Range

5 Click [Scan Network]. The physical fieldbus couplers appear with their IP
address in the "Device found" pane.
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0