Removing The Fieldbus Coupler From Your System; Removing The Fieldbus Coupler From The Carrier Rail; Figure 78: Removing The Fieldbus Coupler (With The Mounting Rail Adapter) From The Mounting Rail - WAGO -SPEEDWAY 767 Manual

198 Service
Pos : 62 /Serie 767 ( WAGO-SPEED WAY)/Ser vic e/F eldbus koppler /Ser vice 767- xxxx_3 @ 8\mod_1279168906701_21.doc x @ 59993 @ 33332 @ 1
16.2.2

Removing the Fieldbus Coupler from your System

To remove the fieldbus coupler from the framework of your system, proceed as
follows:
1. Disconnect the power supply from those devices on which you have
mounted the fieldbus coupler.
2. Release the fieldbus coupler from the framework of your system by
unscrewing the M4 screws.
16.2.3

Removing the Fieldbus Coupler from the Carrier Rail

In order to keep a clear representation, the mounting rail adapter in the following
figure (B, C) is shown without the fieldbus coupler.
If the fieldbus coupler is mounted on a mounting rail, proceed with the removal as
follows:
1. Disconnect the power supply from those devices on which you have
mounted the fieldbus coupler.
2. To remove the fieldbus coupler, press down the release eyebolt of the
mounting rail adapter using a slot screwdriver (B) and remove it from the
mounting rail (C).

Figure 78: Removing the fieldbus coupler (with the mounting rail adapter) from the mounting rail

A
767-1201 FC PROFINET IO 8DI 24V DC
B
WAGO-SPEEDWAY 767
C
Manual
Version 2.2.0