Pos : 25.35 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/F eldbus koppler/Ansc hluss _U SB 5_2 @ 8\mod_1279087307901_21.doc x @ 59883 @ @ 1

Connect your PC with the fieldbus coupler by inserting the USB cable plug

into the fieldbus coupler's USB connection COM (7) and tightening it.

Switch on the fieldbus coupler. Please refer to section "Switching on the

Fieldbus Coupler" for more information. After the fieldbus coupler has been

switched on, your operating system detects a new device and installs the

USB driver.

Pos : 25.36 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Hinweis/Hi nweis _ 767-F BK Treiberinstall. @ 8\mod_1279087361652_21.doc x @ 59889 @ @ 1

Driver installation

During installation of the driver, an MS Windows message may appear several

times informing you that the Windows Logo Test failed. Ignore this message and

click [Continue with installation].

Pos : 25.37 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/F eldbus koppler/Ansc hluss _U SB 5_3 @ 8\mod_1279087334511_21.doc x @ 59886 @ @ 1

When the USB connection is not in use, screw a protective cap on it to

comply with the IP 67 degree of protection.