Figure 66: Package Management 2 (Example) - WAGO -SPEEDWAY 767 Manual

176 Parameterization via WAGOframe

Figure 66: Package management 2 (example)

System update
Updating the firmware
When updating the firmware of the fieldbus coupler, the saved module parameters
may be overwritten. Therefore, check your existing configuration after updating
the firmware.
Perform the system update here. The module settings you made normally remain
unchanged. Otherwise, a corresponding warning message appears. If you still
want to update the firmware, the 767 components are returned to their default
state.
1. Click "System Update" in the left window.
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0