Parameterization Via Wagoframe - WAGO -SPEEDWAY 767 Manual

146

Parameterization via WAGOframe

Pos : 54 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 1Par ametrieren mi t WAGOframe - Ü bersc hrift 1 @ 12\mod_1336119907547_21.doc x @ 94470 @ 1 @ 1
15 Parameterization via WAGOframe
Pos : 55.1 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/F eldbus koppler /FDT/FDT /DTM allgemei n @ 17\mod_1382419422770_21.doc x @ 134740 @ 22223333233 @ 1
This section explains device parameterization with the help of an FDT border
application (FDT/DTM) using WAGOframe.
Changing parameters!
When parameters are incorrectly modified with an FDT/DTM border application
(e.g. WAGOframe), machine components could be placed in a dangerous state
and personnel and machines could be at risk.
Before changing the parameters, ensure that the machine components are in a safe
and defined state and switch off the higher-level controller.
Also ensure before start-up that no personnel remain in the danger area of the
machine components.
FDT is an abbreviation for "Field Device Tool". This refers to an application that
can be utilized for parameterization of the fieldbus devices independent of the
fieldbus being used. For this purpose, the application needs supplementation in
the form of software components, which establish the communication with the
individual devices and supply the adjustable parameters. These software
components are called DTM (Device Type Manager) and produced by the device
manufacturers.
FDT/DTM represents an open concept in which the individual components of
various manufacturers work together. The concept thus reduces the number of
proprietary, manufacturer-specific software solutions and cultivates a uniform
operating concept inside a comprehensive operating program.
For the parameterization of a 767 node, an appropriate DTM is available for each
767 component. Use this DTM to parameterize the 767 components. The 767
components can be parameterized either online or offline. The offline mode
enables the parameterization of a 767 component that is not yet present. In the
offline mode, first store the parameter in a project and later transfer it to the 767
components.
In the online mode, there is a direct connection between the display and the
connected 767 components. If a 767 component is in the online mode, its name is
displayed in bold and italic font in the network window.
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0