General Parameters; Table 92: Information About The Fieldbus Coupler; Table 93: General Fieldbus Information; Table 94: Time Settings - WAGO -SPEEDWAY 767 Manual

188 Parameterization via WAGOframe
15.7.1

General Parameters

Electronic type label

Table 92: Information about the fieldbus coupler

Parameter
Vendor
Release index
Firmware revision
Firmware loader revision
Order number
Description
Serial number
Date of production
Designation
General fieldbus information

Table 93: General fieldbus information

Parameter
Cyclic data exchange enabled
Date/Time

Table 94: Time settings

Parameter
Daylight saving time
Time zone
Actual time
UTC
To transfer the current local time from your PC to the fieldbus coupler, click
[Apply PC time] and then [Write].
767-1201 FC PROFINET IO 8DI 24V DC
Description
Manufacturer
FW.HW.FL
FW: Actual firmware release index
When updating the firmware, please note that the firmware
release index may not be conformed to the printed firmware
release index on the side of the fieldbus coupler.
HW: Hardware release index
FL: Actual firmware loader release index
General information on the module
Electronic marking field
(max. 40 characters)
Description
Enable or disable here a cyclic data exchange with the fieldbus.
Checkbox selected:
Cyclic data exchange enabled.
Checkbox not selected:
Cyclic data exchange disabled.
Description
Activate or deactivate summer time here.
Select your time zone here.
Set the date and time here.
World time display
WAGO-SPEEDWAY 767
Manual
Version 2.2.0