Movilink Interface (767-5204); Table 47: Parameters Of The Movilink Interface - WAGO -SPEEDWAY 767 Manual

102 Parameterizing
9.2.7

MOVILINK Interface (767-5204)

The following settings can be applied to the MOVILINK Interface (preset values
in italics):
Parameter Combinations
Not all parameter combinations are valid.
More information about valid parameterizations is available in the respective I/O
module manual.

Table 47: Parameters of the MOVILINK Interface

Parameter
Module
Basic setting
Diagnostics: Short circuit field supply
Interface 1, Interface 2
Operating mode
Transmission rate [Baud]
Channel 0 ... 3
Operating mode
Diagnostics
Filter time [ms]
Substitute strategy
Substitute value
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Description
Mailbox Mode
Easy Mode, Serial Interface 1
Easy Mode, Serial Interface 2
disabled
enabled
RS-485
RS-232
9600
57600
Digital input
Digital output
disabled
enabled
deactivated
0.1
0.5
3.0
15
20
Set substitute value
Keep last value
0
1
Manual
Version 2.2.0