Figure 48: Opening The Configuration Interface (Online, Example) - WAGO -SPEEDWAY 767 Manual

160 Parameterization via WAGOframe
In the context menu, select Online Parameter. The configuration interface
3.
opens with the fieldbus coupler parameters. Details on these parameters can
be found in section "Parameterizing".

Figure 48: Opening the configuration interface (online, example)

4. To configure the I/O modules, right-click on one of the I/O modules in the
"Network View".
In the context menu, select Online Parameter. The configuration interface
5.
opens with the corresponding I/O module parameters. Information on these
parameters can be found in the respective I/O module manual.
Online Parameter Setting
If you are unable to select the "Online Parameter Setting" entry, the "Offline
Parameter Setting" interface may still be open. Close the interface.
6. To save the parameters in the respective 767 components, click [Write].
7. To read the current parameterization in the respective 767 components, click
[Read].
Pos : 55.2 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0