150
Parameterization via WAGOframe
15.2
Starting WAGOframe
1.
Start the FDT border application by double-clicking on the WAGOframe
logo on your desktop.
Figure 34: WAGOframe logo
2.
You can also start WAGOframe from the start menu of your operating
system by clicking on "Start" and selecting Programs > WAGO Software
> WAGOframe.
3.
When the "Device Selection Wizard" opens, select "Expert Mode". The
"Point to Point Mode" only applies to the configuration of directly
connected devices with no S-BUS (such as WAGO Jumpflex). Click [Next].
Figure 35: "Device Selection Wizard"
4.
When opened for the first time, the "Query WAGOframe" dialog box
appears. Click [Yes] to automatically set up the device catalog on your PC.
After the device catalog has been updated, all 767 components for which a
DTM is installed are listed.
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0