Service Communication Via Ethernet; 15.6.7.3.1 Adding The Communication Dtm Eth; Figure 70: Adding The Communication Dtm - WAGO -SPEEDWAY 767 Manual

180 Parameterization via WAGOframe
Pos : 55.25 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/F eldbus koppler/Ser vic e-Kommuni kati on über ETH ERNET (nur 767-1201) @ 12\mod_1336399295125_21.doc x @ 94594 @ 4555 @ 1
15.6.7.3

Service Communication via ETHERNET

This section describes how to access your SPEEDWAY Station via ETHERNET
with the DTM.

15.6.7.3.1 Adding the Communication DTM ETH

So that you can parameterize the fieldbus coupler and the I/O modules connected
with it, establish a connection between your PC and the ETHERNET network.
The service interface 6626 is preset. You can set the port under "Address Range".
Note that the port cannot be blocked by a firewall.
1 Right-click on "Network" in the "Network View" window.
In the context menu, select Add. The "Add..." dialog opens.
2

Figure 70: Adding the Communication DTM

3 In the "Add" dialog, select "WAGO TCP Speedway".
4 Click [OK] to confirm your selection.
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0