Removing The Fieldbus Coupler From The Profile Adapter; Connecting A New Fieldbus Coupler; Disposal - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
16.2.4

Removing the Fieldbus Coupler from the Profile Adapter

If the fieldbus coupler is mounted on a profile adapter, proceed with the removal
as follows:
1. Disconnect the power supply from the device on which you have mounted
the fieldbus coupler before attempting to remove.
2. Unscrew the screws on which the nuts are fastened and remove the fieldbus
coupler from the profile rail of your system.
3. Unscrew the screws that connect the fieldbus coupler with the profile
adapter.
16.2.5

Connecting a New Fieldbus Coupler

To connect the fieldbus coupler, proceed as described in sections "Mounting the
Fieldbus Coupler" through "Start-Up".
16.3

Disposal

Do not dispose of the 767 components in the household waste; observe the laws
which apply to them. You can also contact a certified waste management
company.
Pos : 63 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.2.0
Service 199