124 Commissioning
Figure 26: WAGO-I/O-CHECK User Interface (Example)
After the node structure has been identified in WAGO-I/O-CHECK, it appears in
the overview area.
To open specific parameterization dialogs for the 750-489 I/O Module, proceed
as follows:
1.
Select the I/O module. The representation of the I/O module is marked.
2.
Right-click to open the context menu and select the Settings menu item.
The parameterization dialog appears. This forms the basis for the following
explanation.
Manual
Version 1.1.0, valid from FW Version 02
WAGO-I/O-SYSTEM 750
750-489 4AI RTD/TC/Strain Gauge Ex i