Adding A Fieldbus Coupler; Figure 41: Adding A Fieldbus Coupler (Example) - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
COM Port
This COM port number remains constant for the fieldbus coupler currently
connected. When connecting a different fieldbus coupler to the PC, the COM port
also changes. In this case, "WAGO Service Speedway" attempts to select the new
COM port automatically. If several fieldbus couplers are connected to the PC,
select the correct COM port.
The "WAGO SPEEDWAY Portmapper" is used to specify a constant COM port.
The software is contained on the "WAGOframe" CD-ROM.
15.4.3

Adding a Fieldbus Coupler

To incorporate the fieldbus coupler into WAGOframe, proceed as follows:
1. Right-click on the "WAGO Service Speedway" DTM in the "Network
View" pane.
In the context menu, select Add.... The "Add..." dialog box opens.
2.

Figure 41: Adding a fieldbus coupler (example)

3. In the "Add..." dialog box, select the fieldbus coupler that you use.
Click [OK] to submit your selection.
4.
Manual
Version 2.2.0
Parameterization via WAGOframe 155