Adding The I/O Modules; Figure 42: Adding The Fieldbus Coupler (Example); Figure 43: Adding The I/O Modules (Example) - WAGO -SPEEDWAY 767 Manual

156 Parameterization via WAGOframe

Figure 42: Adding the fieldbus coupler (example)

15.4.4

Adding the I/O Modules

To incorporate the I/O modules that you use into WAGOframe, proceed as
follows:
1. Right-click on the "<Speedway:> 0767-xxxx" device driver in the "Network
View" pane.
In the context menu, select Add.... The "Add..." dialog box opens.
2.

Figure 43: Adding the I/O modules (example)

3. In the "Add..." dialog box, select the I/O module's device type.
4. Click [OK] to confirm your selection.
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0