WAGO -SPEEDWAY 767 Manual
  1. Manuals
  2. Brands
  3. WAGO Manuals
  4. Control Unit
  5. SPEEDWAY 767 Series
  6. Manual

WAGO -SPEEDWAY 767 Manual

4dio 24v dc 0.2a hs (4xm12) digital in/out module, 24 v dc, 0.2 a, high speed for wago-speedway 767
Hide thumbs Also See for WAGO-SPEEDWAY 767:
Table of Contents

  • Deutsch
    • Table of Contents
    • Copyright
    • Notes about this Documentation
    • Validity of These Operating Instructions
    • Symbols
    • Number Notation
    • Font Conventions
    • Table 1: Number Notation
    • Table 2: Font Conventions
    • Personnel Qualification
    • Subject to Changes
    • Legal Bases
    • Important Notes
    • Technical Condition of Specified Devices
    • Use in Compliance with Underlying Provisions
    • Safety Advice (Precautions)
    • Safety Equipment
    • Notes on Operation
    • Device Description
    • Connectors
    • Figure 1: Connectors
    • Table 3: Legend for Figure "Connectors
    • Table 4: Legend for Figure "Marking Possibilities and Fastening
    • Marking Possibilities and Fastening
    • Figure 2: Marking Possibilities and Fastening (Exemplary)
    • Display Elements
    • Figure 3: Display Elements
    • Table 5: Legend for Figure "Display Elements
    • Labeling
    • Figure 4: Labeling
    • Table 6: Legend for Figure "Labeling
    • Figure 5: Label on the Module
    • Table 7: Description of Manufacturing Number
    • Figure 6: Schematic Diagram
    • Schematic Diagram
    • Dimensions
    • Figure 7: Dimensions of the Module in Millimeters (Exemplary)
    • Technical Data
    • General Data
    • Module Supply
    • Table 8: Technical Data - General
    • Table 9: Technical Data - Module Supply
    • Table 12: Technical Data - Counter
    • Table 11: Technical Data - Input Characteristic
    • Table 10: Technical Data - Digital Inputs
    • Counter (Configurable)
    • Digital Inputs
    • Input Characteristic
    • Digital Outputs
    • Information on Actuator Selection
    • Operating State Influence on Outputs
    • Table 13: Technical Data - Digital Outputs
    • Table 14: Technical Data - Information on Actuator Selection
    • Table 15: Technical Data - Operating State Influence on Outputs
    • Table 17: Technical Data - Isolation
    • Table 20: Technical Data - Process Image
    • Table 19: Technical Data - Diagnostics
    • Table 18: Technical Data - Configurable Functions
    • Configurable Functions
    • Table 16: Technical Data - System Bus
    • Process Image
    • Diagnostics
    • Isolation
    • System Bus (S-BUS)
    • Indicators
    • Table 21: Technical Data - Indicators
    • Approvals
    • Standards and Guidelines
    • Mounting
    • Information on Mounting
    • Tools and Accessories Required for Mounting
    • Direct Mounting on Your System
    • Figure 8: Mounting the Module on a Grounded Frame or to
    • Mounting on a Carrier Rail (Only with WAGO Accessories)
    • Fastening the Carrier Rail Adapter to the Module
    • Figure 9: Fastening to the Carrier Rail Adapter
    • Fastening the Module with Carrier Rail Adapter to a Carrier Rail
    • Figure 10: Mounting the Carrier Rail Adapter (Exemplary)
    • Figure 11: Fastening to the Profile Adapter
    • Fastening the Profile Adapter to the Module
    • Mounting on a Profile Rail (Only with WAGO Accessories)
    • Fastening the Module with Profile Adapter to a Profile Rail
    • Marking and Replacing the Marking Spaces
    • Figure 12: Replacing the Marking Spaces
    • Mounting the Spacer in the Case of Compact Arrangement
    • Figure 13: Attaching a Spacer to a Module
    • Figure 14: Attaching Another Module with a Spacer
    • Connecting Data and Supply Cables
    • Notes
    • Required Accessories
    • Connecting the S-BUS Cables
    • Table 22: S-BUS Connection Assignment
    • Figure 15: S-BUS Connected to a Fieldbus Coupler and Modules
    • Connecting the Supply Cable
    • Table 23: Supply Connection Assignment
    • Figure 16: Supply Cable Connected to a Fieldbus Coupler and Modules
    • Connect Sensor/Actuator Cable
    • Table 24: Digital Inputs/Outputs: Connection Assignment
    • Figure 17: Connectors M12 (Exemplary)
    • Commissioning
    • Parameterizing
    • Table 25: DTM Buttons
    • Figure 18: Example of an Open DTM, Including Parameters
    • Table 26: Information on the Module
    • Electronic Type Label
    • Diagnostic Overview
    • Figure 19: Example of the Diagnostic Overview of a Module (Information May Differ from the Actual Module)
    • Table 27: Diagnostics Setup
    • Table 28: Information about Existing Module Diagnostics
    • Input and Output Parameters
    • Parameters in the DO Mode
    • Table 29: Overview of Adjustable Parameters for the Digital Outputs
    • Table 30: Overview of Adjustable Parameters for the Digital Inputs
    • Parameters in the DI Mode
    • Parameters in the DIO Mode
    • Table 31: Overview of Adjustable Counter Parameters for the DIO Module
    • Parameters in the DIO Mode with Counter
    • Global Settings
    • Parameters of Field Supply
    • Table 32: Overview of Parameters for the Entire Module
    • Table 33: Overview of Adjustable Parameters for the Field Supply
    • Automatic Storage of System Parameters
    • Updating the Firmware
    • Process Image
    • Table 34: DO Input Data in the Process Image
    • Image in the DO Mode
    • Input Data
    • Output Data
    • Table 35: DO Output Data in the Process Image
    • Image in the DI Mode
    • Input Data
    • Table 36: DI Input Data in the Process Image
    • Output Data
    • Table 37: DI Output Data in the Process Image
    • Table 38: DIO Input Data in the Process Image
    • Input Data
    • Image in the DIO Mode
    • Output Data
    • Table 39: DIO Output Data in the Process Image
    • Image in the DIO Mode with Counter
    • Input Data
    • Table 40: Dio+Counter, Input Data in the Process Image
    • Output Data
    • Table 41: Dio+Counter, Output Data in the Process Image
    • Figure 20: Counter Status Depending on the Control Inputs (Gate and Count Direction Input)
    • Counter Function
    • Table 42: Connection Assignment for the Counter Function
    • Control of the Counter Via Inputs and Outputs
    • Controlling and Monitoring of the Counter Via the Process Data
    • Control Byte
    • Table 43: Control Byte
    • Status Byte
    • Table 44: Status Byte
    • Example of Controlling the Counter Via the Process Data
    • Table 45: Example of Controlling the Counter Via Control Byte
    • Figure 21: Leds Indicating Operational Messages
    • Table 46: Operating Messages 1
    • LED Signaling
    • Diagnostics
    • Table 47: Operating Messages 2
    • Service
    • Updating the Firmware
    • Replacing the Module
    • Disconnecting the Cables
    • Removing the Module from Your System
    • Removing the Module from the Carrier Rail
    • Figure 22: Removing the Module (with the Carrier Rail Adapter) from the Carrier Rail
    • Disposal
    • Connecting the Module
    • Removing the Module from the Profile Adapter
    • Use in Hazardous Environments
    • Marking Configuration Examples
    • Marking for Europe According to ATEX and IEC-Ex
    • Figure 23: Side Marking Example for Approved WAGO SPEEDWAY 767 Series Fieldbus Coupler According to ATEX and Iecex
    • Installation Regulations
    • Special Conditions for Safe Use (ATEX Certificate BVS 15 ATEX E098X)
    • Special Conditions for Safe Use (IEC Ex Certificate Iecex BVS 15.0083X)
    • Appendix
    • Diagnostic Information

  • English

Advertisement

Quick Links

Download this manual
WAGO-SPEEDWAY 767
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1
Manual
767-5401
4DIO 24V DC 0.2A HS (4xM12)
Digital In/Out Module, 24 V DC, 0.2 A, High Speed
Version 1.1.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Hinweise z ur Dokumentation/Impres sum für Standardhandbüc her - allg. Angaben, Ansc hriften, Tel efonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WAGO-SPEEDWAY 767 and is the answer not in the manual?

Questions and answers

Related Manuals for WAGO WAGO-SPEEDWAY 767

Summary of Contents for WAGO WAGO-SPEEDWAY 767

  • Page 1 WAGO-SPEEDWAY 767 Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1 Manual 767-5401 4DIO 24V DC 0.2A HS (4xM12) Digital In/Out Module, 24 V DC, 0.2 A, High Speed...
  • Page 2 WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) © 2016 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 – 1 69 E-Mail: info@wago.com...

  • Page 3: Table Of Contents

    Information on Mounting ................ 30 Tools and Accessories Required for Mounting ........32 Direct Mounting on Your System ............33 Mounting on a Carrier Rail (only with WAGO Accessories) ....34 4.4.1 Fastening the Carrier Rail Adapter to the Module ......34 Manual Version 1.1.0...
  • Page 4 767-5401 4DIO 24V DC 0.2A HS (4xM12) 4.4.2 Fastening the Module with Carrier Rail Adapter to a Carrier Rail ..35 Mounting on a Profile Rail (only with WAGO Accessories) ....36 4.5.1 Fastening the Profile Adapter to the Module ........36 4.5.2...

  • Page 5: Wago-Speedway 767

    WAGO-SPEEDWAY 767 Table of Contents 767-5401 4DIO 24V DC 0.2A HS (4xM12) Service ......................81 11.1 Updating the Firmware ................81 11.2 Replacing the Module ................81 11.2.1 Disconnecting the Cables ..............81 11.2.2 Removing the Module from Your System ......... 82 11.2.3...

  • Page 6: Notes About This Documentation

    Pos : 9 /Seri e 767 ( WAGO- SPEED WAY) /Wic htige Erl äuter ung en/Sic her hei tshi nweis e/Warnung/Warnung: R eleas e N otes beac hten @ 8\mod_1278912368761_21.doc x @ 59530 @ @ 1...

  • Page 7: Symbols

    WAGO-SPEEDWAY 767 Notes about this Documentation 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 13.3 /All e Seri en ( Allgemei ne Module)/Ü bers chriften für alle Serien/Hinweis e z ur Dokumentation/Symbol e - Ü bersc hrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 13.4.1 /All e Serien ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hinweis e/Gefahr/Gefahr: _War nung vor Personenschäden allgemei n_ - Erl äuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1...
  • Page 8 Notes about this Documentation WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 13.5 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.1.0...

  • Page 9: Number Notation

    Font Conventions Table 2: Font Conventions Font Type Indicates italic Names of paths and data files are marked in italic-type. e.g.: C:\Program Files\WAGO Software Menu Menu items are marked in bold letters. e.g.: Save > A greater-than sign between two names means the selection of a menu item from a menu.

  • Page 10: Important Notes

    Thus, the existence of such rights cannot be excluded. Pos : 16.4 /Serie 767 (WAGO-SPEED WAY)/Wic htige Erläuterungen/I/O-M odul/Pers onalqualifi kation 767- xxxx @ 5\mod_1248175871265_21.doc x @ 38705 @ 3 @ 1 2.1.2...

  • Page 11: Use In Compliance With Underlying Provisions

    The module was developed for applications requiring IP 67 (NEMA type 6, 6P) protection. Pos : 16.9 /Serie 767 (WAGO-SPEED WAY)/Wic htige Erläuterungen/I/O-M odul/Bes timmungsgemäß e Verwendung 767- xxxx allgemei n3 @ 8\mod_1278997190572_21.doc x @ 59680 @ @ 1 Applications other than those described in this manual are not permitted.

  • Page 12: Safety Advice (Precautions)

    Series component has been in operation, allow it to cool off before moving it. Pos : 16.15 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Ac htung/Ac htung: Höchs te Strombel astbar keit der Vers orgungs kontakte @ 8\mod_1278308653219_21.doc x @ 58916 @ @ 1...

  • Page 13: Safety Equipment

    Observe the marking on the front and rear side of the module. Pos : 16.20 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Sic her hei tsei nrichtungen 767- xxxx @ 7\mod_1268142379773_21.doc x @ 52055 @ 2 @ 1 Safety Equipment All 767 Series products are designed to meet the requirements of IP67.

  • Page 14: Notes On Operation

    WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 16.22 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Hinweise z um Betri eb 767- xxxx, Teil 1 @ 7\mod_1266921815843_21.doc x @ 51219 @ 2 @ 1 Notes on Operation...

  • Page 15: Device Description

    Device Description Pos : 18.2 /Serie 767 (WAGO-SPEED WAY)/Ger ätebesc hrei bung/I/O-Module/Gerätebes chr eibung 767- 54xx 58xx High-Speed, Ei nleitung @ 12\mod_1328613047735_21.doc x @ 88010 @ @ 1 This digital input/output module 4DIO 24V DC 0.2A HS (4xM12), item no. 767- 5401, is used to read binary signals from sensors resp.

  • Page 16: Connectors

    M12 socket, A-coded functions. Pos : 18.8 /Serie 767 (WAGO-SPEED WAY)/Ger ätebesc hrei bung/Ansc hl üss e/I/O-Module/Legende Anschl uss 767- xxxx Vers orgung, nic ht 4803 und 4804 @ 5\mod_1248847875765_21.doc x @ 39171 @ @ 1 Supply output To use the Logic-/Sensor-...

  • Page 17: Marking Possibilities And Fastening

    Device Description 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 18.10 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Befestigung/I/O-Module/Besc hriftung und Befestigung 767-xxxx_4xM 12 - Bild @ 5\mod_1248845067328_21.doc x @ 39110 @ 2 @ 1 Marking Possibilities and Fastening Figure 2: Marking possibilities and fastening (exemplary) Pos : 18.11 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Befestigung/I/O-Module/Legende z u Beschriftung und Befes tigung 767- xxxx @ 5\mod_1249475777546_21.doc x @ 40514 @ @ 1...

  • Page 18: Display Elements

    Yellow: status of the channels Red: outputs´ diagnostics Pos : 18.17 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Anz eigeel emente/I/O-M odul e/Legende zu Anz eigeel emente 767- xxxx, Pos. 18+19: Status U A und ULS @ 7\mod_1268053208570_21.doc x @ 51957 @ @ 1 Green Actuator supply is present.

  • Page 19: Labeling

    Figure 4: Labeling Pos : 18.19.3 /Serie 767 ( WAGO-SPEEDWAY)/Gerätebeschr eibung/Bedr uc kung/I/O-M odul e/Legende zur Bedr uc kung 767- 5xxx D IO, auß er 5803 @ 7\mod_1268045599057_21.doc x @ 51932 @ @ 1 Table 6: Legend for figure "Labeling"...

  • Page 20: Figure 5: Label On The Module

    Pos : 18.19.6 /Serie 767 ( WAGO-SPEEDWAY)/Gerätebeschr eibung/Bedr uc kung/I/O-M odul e/Bedruc kung sei tlich - Bild @ 5\mod_1248864035578_21.doc x @ 39357 @ @ 1 Figure 5: Label on the module Pos : 18.20 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Bedr uc kung/I/O-M odul e/Bedruc kung sei tlich - Legende @ 9\mod_1286969974465_21.doc x @ 65601 @ @ 1 Table 7: Description of manufacturing number...

  • Page 21: Schematic Diagram

    Schematic Diagram Pos : 18.23 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Sc hematis che Sc haltbilder/I/O-M odule/Ei nleitung zum sc hematisc hen Sc haltbil d 767-5xxx DIO @ 10\mod_1306757989112_21.doc x @ 73325 @ @ 1 The following schematic diagram provides an overview of the power supply and principle of operation of the power supply connections, as well as the digital inputs and outputs of the modules (see also chapters "Connecting the Supply...

  • Page 22: Dimensions

    Pos : 18.26 /Alle Serien (Allgemeine M odul e)/Übersc hriften für all e Seri en/Gerätebes chr eibung/Abmess ungen - Ü bersc hrift 2 @ 5\mod_1248869612468_21.doc x @ 39441 @ 2 @ 1 Dimensions Pos : 18.27 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Abmessungen/I/O-M odule/Abmessungen 767- xxxx_IO_4xM 12 - Bild @ 5\mod_1248873304828_21.doc x @ 39496 @ @ 1 Figure 7: Dimensions of the module in millimeters (exemplary) Pos : 18.28 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 23: Technical Data

    ATEX/IECEx certificate are binding in this application! Pos : 18.31 /Serie 767 ( WAGO-SPEED WAY)/Gerätebeschr eibung/Tec hnisc he Daten/I/O-M odule/Sondermodul e/T ec hnisc he D aten 767-5401 @ 11\mod_1328607670541_21.doc x @ 87953 @ 33333333333333 @ 1 3.7.1 General Data Table 8: Technical data –...

  • Page 24: Digital Inputs

    Device Description WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) 3.7.3 Digital Inputs Table 10: Technical data – Digital Inputs Number of input channels 4 (0 … 3) Connection type 4 shielded M12 connectors, A-coded, 5 poles Wire connection 2- or 3-wire “Front end”-delay time (hardware)

  • Page 25: Digital Outputs

    WAGO-SPEEDWAY 767 Device Description 767-5401 4DIO 24V DC 0.2A HS (4xM12) 3.7.6 Digital Outputs Table 13: Technical data – Digital Outputs No. of output channels 4 (0 … 3) Connection type 4 shielded M12 connectors, A-coded, 5 poles Wire connection...

  • Page 26: System Bus (S-Bus)

    Device Description WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) 3.7.9 System Bus (S-BUS) Table 16: Technical data – System Bus Connection type 2 shielded M12 connectors, B-coded, 5 poles 3.7.10 Isolation Table 17: Technical data – Isolation Channel - channel...

  • Page 27: Indicators

    WAGO-SPEEDWAY 767 Device Description 767-5401 4DIO 24V DC 0.2A HS (4xM12) 3.7.14 Indicators Table 21: Technical data – Indicators S-BUS status LED (green/red/orange) Error status LED (red) 0 … 3: Input and output signal LED (yellow) status 0 … 3:...

  • Page 28: Approvals

    Pos : 18.33.3.3 /D okumentati on allgemein/Gli ederungsel emente/------Leerzeil e------ @ 3\mod_1224662755687_0.doc x @ 24460 @ @ 1 Pos : 18.33.4 /Serie 767 ( WAGO-SPEEDWAY)/Gerätebeschr eibung/Zul ass ung en/Zul ass ung en I/O-Modul e 767- xxxx Ex, ohne Variantenangabe - Ei nlei tung @ 24\mod_1447686155055_21.doc x @ 195692 @ @ 1 The following Ex approvals are pending for 767-5401 module: Pos : 18.33.5 /Alle Serien (Allgemeine M odul e)/Z ulass ungen/Ex-Z ul ass ungen/TÜ...

  • Page 29: Standards And Guidelines

    Standards and Guidelines Pos : 18.35.2 /Serie 767 ( WAGO-SPEEDWAY)/Gerätebeschr eibung/Nor men und Richtlini en/N or men und Richtlinien I/O-Modul e 767- xxxx, ohne Variantenangabe - Ei nleitung @ 24\mod_1447686649865_21.doc x @ 195700 @ @ 1 The module 767-5401 meets the following standards and guidelines: Pos : 18.35.3 /Alle Serien (Allgemeine M odul e)/Nor men und Ric htlini en/EM V-Nor men - Standard/EG-EM V-Richtli nie 2004/108/EG @ 7\mod_1274262373820_21.doc x @ 56628 @ @ 1...

  • Page 30: Mounting

    Pos : 21.2 /Serie 767 (WAGO-SPEED WAY)/M ontier en/I/O-Modul e/M ontage_Hi nweis e 767- xxxx allgemei n_1 @ 5\mod_1249028727125_21.doc x @ 39643 @ 2 @ 1 Information on Mounting The following information shall always be observed: •...
  • Page 31 Mounting 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 21.5 /Serie 767 (WAGO-SPEED WAY)/M ontier en/I/O-Modul e/Hi nweis : Montage_Ei nbaulag e_767- xxxx_I/O-M odule @ 24\mod_1448268126523_21.doc x @ 196008 @ @ 1 Any mounting position is possible. Ensure a safe mounting position! In explosion hazardous environments no increased mechanical loads must be present at the installation location.

  • Page 32: Tools And Accessories Required For Mounting

    WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 21.7 /Serie 767 (WAGO-SPEED WAY)/M ontier en/I/O-Modul e/M ontage_Wer kzeug 767- xxxx allgemein_1 @ 5\mod_1249034240265_21.doc x @ 39783 @ 2 @ 1 Tools and Accessories Required for Mounting Depending on the mounting type, the following tools are required for installation: •...

  • Page 33: Direct Mounting On Your System

    Pos : 21.11 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Hinweis/Hi nweis : 767- xxxx Distanz stüc k @ 8\mod_1279025151416_21.doc x @ 59810 @ @ 1 Direct Mounting We recommend using WAGO spacers for compact direct mounting.

  • Page 34: Mounting On A Carrier Rail (Only With Wago Accessories)

    Pos : 21.16 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage auf Tr agschi ene 767- xxxx_4xM 12 - Bil d @ 5\mod_1249284442703_21.doc x @ 39821 @ @ 1 Figure 9: Fastening to the carrier rail adapter Pos : 21.17 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 35: Fastening The Module With Carrier Rail Adapter To A Carrier Rail

    (item no.: 249-116 or 249-117) for stabilization is required. Pos : 21.19 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Befestigung auf Tragsc hi enenadapter 767- xxxx - Bil d @ 5\mod_1249030807718_21.doc x @ 39757 @ @ 1 Figure 10: Mounting the carrier rail adapter (exemplary) Pos : 21.20 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 36: Mounting On A Profile Rail (Only With Wago Accessories)

    WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 21.21 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage an einer Pr ofilsc hiene 767- xxxx allgemein @ 5\mod_1249031560359_21.doc x @ 39765 @ 23 @ 1 Mounting on a Profile Rail (only with WAGO Accessories) 4.5.1...

  • Page 37: Fastening The Module With Profile Adapter To A Profile Rail

    Mounting 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 21.24 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage mi t Pr ofiladapter an einer Pr ofilsc hiene 767- xxxx allgemein @ 5\mod_1249032474562_21.doc x @ 39773 @ 3 @ 1 4.5.2...

  • Page 38: Marking And Replacing The Marking Spaces

    WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 21.26 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Besc hriftung austauschen 767- xxxx allgemein @ 5\mod_1249034032812_21.doc x @ 39780 @ 2 @ 1 Marking and Replacing the Marking Spaces The module marker card (10) and marking strip (12) are attached when delivered.

  • Page 39: Mounting The Spacer In The Case Of Compact Arrangement

    M4 screws via the mounting holes. Pos : 21.30 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Distanzstüc k T eil 1_767- xxxx_4xM 12 - Bil d @ 5\mod_1249284921328_21.doc x @ 39843 @ @ 1 Figure 13: Attaching a spacer to a module Pos : 21.31 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 40: Figure 14: Attaching Another Module With A Spacer

    The last 767 component is fastened without a spacer. Pos : 21.33 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Distanzstüc k T eil 2_767- xxxx_4xM 12 - Bil d @ 5\mod_1249284983031_21.doc x @ 39847 @ @ 1 Figure 14: Attaching another module with a spacer Pos : 22 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 41: Connecting Data And Supply Cables

    767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 23.1 /Serie 767 (WAGO-SPEED WAY)/Ans chl uss D aten- und Vers orgungs kabel/I/O-Modul e/01_Ansc hl uss der Daten- und Vers orgungs kabel - Übersc hrift 1 @ 8\mod_1278310189976_21.doc x @ 58919 @ 1 @ 1 Connecting Data and Supply Cables Pos : 23.2 /Serie 767 (WAGO-SPEED WAY)/Ans chl uss D aten- und Vers orgungs kabel/I/O-Modul e/02_Hinweis e - Ü...

  • Page 42: Required Accessories

    Pos : 23.9 /Serie 767 (WAGO-SPEED WAY)/Ans chl uss D aten- und Vers orgungs kabel/I/O-Modul e/Ans chl uss _Hinweise T eil 3.1 @ 8\mod_1278314911479_21.doc x @ 58959 @ @ 1 •...

  • Page 43: Connecting The S-Bus Cables

    Connecting Data and Supply Cables 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 23.12 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_S-BU S allgemein @ 5\mod_1249287447062_21.doc x @ 39873 @ 2 @ 1 Connecting the S-BUS Cables The S-BUS is used for communication between a fieldbus coupler and the connected 767 Series components.

  • Page 44: Figure 15: S-Bus Connected To A Fieldbus Coupler And Modules

    Pos : 23.13 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_S-BU S_4xM 12 - Bil d @ 5\mod_1249301323125_21.doc x @ 40063 @ @ 1 Figure 15: S-BUS connected to a fieldbus coupler and modules Pos : 23.14 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 45: Connecting The Supply Cable

    0 V U Pos : 23.16 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Ac htung/Ac htung: Höchs te Strombel astbar keit der Vers orgungs kontakte @ 8\mod_1278308653219_21.doc x @ 58916 @ @ 1 The highest current carrying capacity of the supply contacts is 4 A!

  • Page 46: Figure 16: Supply Cable Connected To A Fieldbus Coupler And Modules

    Pos : 23.19 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Spannungs vers orgung _4xM 12 - Bild @ 5\mod_1249301804906_21.doc x @ 40067 @ @ 1 Figure 16: Supply cable connected to a fieldbus coupler and modules Pos : 23.20 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 47: Connect Sensor/Actuator Cable

    X2, X4 Pos : 23.22 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Ac htung/Ac htung: Höchs te Strombel astbar bei t der Vers .kontakte( Sens.+ Akt.) und Sensor-/Aktorstr omaufn. 1A @ 13\mod_1343398525295_21.doc x @ 101132 @ @ 1...

  • Page 48: Figure 17: Connectors M12 (Exemplary)

    Pos : 23.25 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlüs se_4xM12_Sensor en/Aktor en - Bil d @ 5\mod_1249293750953_21.doc x @ 39979 @ @ 1 Figure 17: Connectors M12 (exemplary) Pos : 24 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 49: Commissioning

    Pos : 25 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Inbetri ebnehmen - Konfigurier en - Parametri eren - Bedienen/In Betri eb nehmen - Ü bersc hrift 1 @ 4\mod_1240901452750_21.doc x @ 31570 @ 1 @ 1 Commissioning Pos : 26 /Serie 767 ( WAGO-SPEED WAY)/Wic htige Erläuterungen/Sicherheits hinweis e/Achtung/Achtung: Offene Ansc hlüss e @ 8\mod_1278308159953_21.doc x @ 58910 @ @ 1 Exposed connections! If connections have not been closed with protective caps, liquid or dirt can penetrate the components of the 767 Series module and ruin it.

  • Page 50: Parameterizing

    Pos : 29 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Inbetri ebnehmen - Konfigurier en - Parametri eren - Bedienen/Parametrier en - Übersc hrift 1 @ 3\mod_1223554593484_21.doc x @ 23717 @ 1 @ 1 Parameterizing Pos : 30.1 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/I/O-M odule/Parametri erung 767- xxxx allgemei n @ 5\mod_1249376935062_21.doc x @ 40257 @ @ 1 All parameters listed here can be set using WAGOframe (or another FDT/DTM frame application) for the module.

  • Page 51: Figure 18: Example Of An Open Dtm, Including Parameters

    PC. Opens the DTM online help. Pos : 30.2 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/I/O-M odule/Parametri erung 767- xxxx allgemei n - Bild @ 5\mod_1249377954171_21.doc x @ 40275 @ @ 1 Figure 18: Example of an open DTM, including parameters Pos : 30.3 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 52: Electronic Type Label

    WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 30.4 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/I/O-M odule/Parametri erung 767- xxxx Elektronisc hes T ypensc hild @ 5\mod_1249377784078_21.doc x @ 40260 @ 2 @ 1 Electronic Type Label Table 26: Information on the module...

  • Page 53: Diagnostic Overview

    Parameterizing 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 30.6 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/I/O-M odule/Parametri erung 767- xxxx Di agnoseübersic ht_1 @ 14\mod_1360836957753_21.doc x @ 111870 @ 2 @ 1 Diagnostic Overview The currently pending diagnostics existing on the module are displayed here. In this view of the DTM, you can enable simulation of the diagnostics, as well as disable transmission of the diagnostics.

  • Page 54: Table 28: Information About Existing Module Diagnostics

    The module F-LED illuminates. Pos : 30.10 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/I/O-Module/Parametrier ung Global e Di agnosen Kurzschl uss /Überlas t und U nterbr echung Fel dversorgung @ 8\mod_1278394655719_21.doc x @ 59061 @ @ 1...

  • Page 55: Input And Output Parameters

    767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 30.14 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/I/O-Module/Parametrier ung 767-54xx Parameter der Ein-/Ausgänge i n den unterschi edl . Betri ebs arten @ 12\mod_1337169574203_21.doc x @ 95250 @ 23333 @ 1 Input and Output Parameters...

  • Page 56: Parameters In The Do Mode

    Parameterizing WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) 7.3.1 Parameters in the DO Mode Table 29: Overview of adjustable parameters for the digital outputs Parameter Description Function mode Mode display Designation Electronic marking field (max. 40 characters). Output value The output state is indicated in this field.
  • Page 57 WAGO-SPEEDWAY 767 Parameterizing 767-5401 4DIO 24V DC 0.2A HS (4xM12) Table 29: Overview of adjustable parameters for the digital outputs Parameter Description Actuator restart mode Set the restart behavior of an enabled output if the output has been disabled due to the "Overtemperature" diagnosis. You have the following...

  • Page 58: Parameters In The Di Mode

    Parameterizing WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) 7.3.2 Parameters in the DI Mode Table 30: Overview of adjustable parameters for the digital inputs Parameter Description Function mode Mode display Designation Electronic marking field (max. 40 characters) Input value The input state is indicated in this box.

  • Page 59: Parameters In The Dio Mode With Counter

    WAGO-SPEEDWAY 767 Parameterizing 767-5401 4DIO 24V DC 0.2A HS (4xM12) 7.3.4 Parameters in the DIO Mode with Counter Table 31: Overview of adjustable counter parameters for the DIO Module Parameter Description Counter value This field indicates the counter status Counter mode...
  • Page 60 Parameterizing WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) Table 31: Overview of adjustable counter parameters for the DIO Module Parameter Description Start/limit value Enter a value (0 - 65535), which is used as the start value or as a reference to control the switching output.

  • Page 61: Global Settings

    ), the corresponding diagnostic is displayed here. Low voltage U Pos : 30.17 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/I/O-Module/Parametrier ung 767-38xx, 5xxx, 6401, 7401 Param. der F el dvers orgung @ 5\mod_1249379780656_21.doc x @ 40285 @ 2 @ 1 Parameters of Field Supply...

  • Page 62: Automatic Storage Of System Parameters

    "Parameter Setting via FDT/DTM" section. Pos : 30.20 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/I/O-Module/Parametrier ung 767- xxxx Aktualisier ung der Firmwar e @ 7\mod_1265881922171_21.doc x @ 50306 @ 2 @ 1 Updating the Firmware When updating the module firmware, the saved module parameters can be overwritten.

  • Page 63: Process Image

    Process Image Pos : 33 /Serie 767 ( WAGO-SPEED WAY)/Proz ess abbild/I/O-Module/Proz ess abbil d 767-5401 Pr ozes sabbild betriebsar tabhängig @ 12\mod_1337592577439_21.doc x @ 95309 @ @ 1 The size of the process image depends on the configured operating mode: •...
  • Page 64 Process Image WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) Diagnostic Actuator short circuit/overload The "Actuator short circuit/overload" diagnostic is dependent on the switching status of the outputs (see section "Diagnostics" > "Diagnostic overview". Pos : 36 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.1.0...

  • Page 65: Image In The Do Mode

    767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 37 /Serie 767 ( WAGO-SPEED WAY)/Proz ess abbild/I/O-Module/Proz ess abbil d 767-5401 Ei n- und Ausg angs daten @ 12\mod_1328714416804_21.doc x @ 88078 @ 233233233233 @ 1 Image in the DO Mode 8.1.1...

  • Page 66: Output Data

    Process Image WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) 8.1.2 Output Data The output data is transmitted from the fieldbus coupler to the I/O module. The process image of the I/O module can contain process data with or without diagnostic confirmation.

  • Page 67: Image In The Di Mode

    WAGO-SPEEDWAY 767 Process Image 767-5401 4DIO 24V DC 0.2A HS (4xM12) Image in the DI Mode 8.2.1 Input Data The input data is transmitted from the I/O module to the fieldbus coupler. The process image of the I/O module can contain process data with or without diagnostic messages.

  • Page 68: Output Data

    Process Image WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) 8.2.2 Output Data The process image for the output data that is transmitted from the fieldbus coupler to the I/O module has a size of 1 byte if a synchronous diagnostic confirmation has been parameterized.

  • Page 69: Image In The Dio Mode

    WAGO-SPEEDWAY 767 Process Image 767-5401 4DIO 24V DC 0.2A HS (4xM12) Image in the DIO Mode 8.3.1 Input Data The size of the process image for the input data, which is transmitted from the I/O module to the fieldbus coupler, is 2 bytes if a synchronous diagnosis has been parameterized.

  • Page 70: Output Data

    Process Image WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) 8.3.2 Output Data The output data is transmitted from the fieldbus coupler to the I/O module. The process image of the I/O module can contain process data with or without diagnostic confirmation.

  • Page 71: Image In The Dio Mode With Counter

    WAGO-SPEEDWAY 767 Process Image 767-5401 4DIO 24V DC 0.2A HS (4xM12) Image in the DIO Mode with Counter 8.4.1 Input Data The size of the process image for the input data, which is transmitted from the I/O module to the fieldbus coupler, is 5 bytes if a synchronous diagnosis has been parameterized.

  • Page 72: Output Data

    Process Image WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) 8.4.2 Output Data The output data is transmitted from the fieldbus coupler to the I/O module. The process image of the I/O module can contain process data with or without diagnostic confirmation.

  • Page 73: Counter Function

    Counter function 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 39 /Serie 767 ( WAGO-SPEED WAY)/Sonderfunkti onen/I/O-Module/Z ähler/Z ählerfunktion 767- 54xx_1 Z ähler, X1 ... X4 @ 12\mod_1328628118116_21.doc x @ 88014 @ 122333 @ 1 Counter function The module provides a counter, which can be controlled both via the connections X1 …...

  • Page 74: Control Of The Counter Via Inputs And Outputs

    In order to control the counter functions via the inputs and outputs of the module, switch these on via DTMs using WAGOframe or another FDT/DTM framework application. You can find the necessary DTMs at wago.com. This configuration is also possible with some fieldbus systems (e.g. PROFIBUSGSD).

  • Page 75: Controlling And Monitoring Of The Counter Via The Process Data

    WAGO-SPEEDWAY 767 Counter function 767-5401 4DIO 24V DC 0.2A HS (4xM12) Controlling and Monitoring of the Counter via the Process Data The control byte and status byte used for counter controlling and monitoring are listed below: 9.2.1 Control Byte The control byte allows the configuration of the counter via the process data:...

  • Page 76: Status Byte

    Counter function WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) 9.2.2 Status Byte The counter status is output via the status byte in the process image, which is defined as follows: Table 44: Status byte Status byte Gate status...

  • Page 77: Example Of Controlling The Counter Via The Process Data

    WAGO-SPEEDWAY 767 Counter function 767-5401 4DIO 24V DC 0.2A HS (4xM12) 9.2.3 Example of Controlling the Counter via the Process Data Prerequisite: For the module in DTM, you have set the operating mode "DIO module + counter." For control of the counter via the output data, the parameter "Simulation"...

  • Page 78: Diagnostics

    Information regarding remedies of certain causes is also provided. Pos : 43.2 /Serie 767 (WAGO-SPEED WAY)/Wic htige Erläuterungen/Sicherheits hinweis e/Hi nweis /Hinweis: 767- 4xxx/- 5xxx Betriebs meldungen Deakti vierbar e Diag nos en @ 7\mod_1265892089421_21.doc x @ 50332 @ @ 1 Disabling specific diagnostics Use the diagnostic overview (section "Parameterizing"...

  • Page 79: 767-5401 4Dio 24V Dc 0.2A Hs (4Xm12)

    S-BUS cable for damages. Pos : 43.5 /Serie 767 (WAGO-SPEED WAY)/Di agnose/I/O-Modul e/Betriebs mel dungen 767- 5xxx D IO Allgemein ( Pos. 15, T eil 2) @ 7\mod_1268637618295_21.doc x @ 52466 @ @ 1 Green, flashing,...

  • Page 80: Table 47: Operating Messages 2

    Pos : 43.8 /Serie 767 (WAGO-SPEED WAY)/Di agnose/I/O-Modul e/Betriebs mel dungen 767- xxxx U LS und UA (Pos. 18 + 19) @ 8\mod_1278577022948_21.doc x @ 59316 @ @ 1 Green Actuator supply U present.

  • Page 81: Service

    Disconnect the power supply from those devices on which you have mounted the module. Pos : 49 /Serie 767 ( WAGO-SPEED WAY)/Wic htige Erläuterungen/Sicherheits hinweis e/Vorsic ht/Vorsicht: H eiße Ansc hlussbuc hs en @ 8\mod_1278308217203_21.doc x @ 58913 @ @ 1 Hot connection sockets! Even when taking into account derating, high surface temperatures on the metallic connection sockets and on the enclosure can arise during operation.

  • Page 82: Removing The Module From Your System

    WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 52 /Serie 767 ( WAGO-SPEED WAY)/Ser vic e/I/O-M odule/Ser vic e 767- xxxx allgemein 2.2 @ 8\mod_1278649957222_21.doc x @ 59430 @ 3 @ 1 11.2.2 Removing the Module from Your System...

  • Page 83: Removing The Module From The Profile Adapter

    Service 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 56 /Serie 767 ( WAGO-SPEED WAY)/Ser vic e/I/O-M odule/Ser vic e 767- xxxx allgemein 4 @ 5\mod_1249471383765_21.doc x @ 40467 @ 332 @ 1 11.2.4 Removing the Module from the Profile Adapter...

  • Page 84: Use In Hazardous Environments

    Use in Hazardous Environments Pos : 58.2 /Serie 767 (WAGO-SPEED WAY)/Eins atz in Ex- Ber eichen/Ei ns atz ber eic h Serie 767 @ 22\mod_1428492971659_21.doc x @ 179803 @ @ 1 The modular system WAGO-SPEEDWAY 767 (electrical equipment) is designed for use in Zone 2 and 22 hazardous areas.

  • Page 85: Marking Configuration Examples

    Marking for Europe According to ATEX and IEC-Ex Pos : 58.6 /Serie 767 (WAGO-SPEED WAY)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung der AT EX- und IEC- Ex-zug elass enen 767-Ger äte gemäß C ENELEC und IEC_2013 @ 22\mod_1428493093265_21.doc x @ 179811 @ @ 1...

  • Page 86: Installation Regulations

    Use in Hazardous Environments WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 58.8 /All e Seri en ( Allgemei ne Module)/Eins atz in Ex- Ber eichen/Errichtungs besti mmungen - Ü berschrift 2 @ 3\mod_1232453624234_21.doc x @ 26370 @ 2 @ 1 12.2...

  • Page 87: Special Conditions For Safe Use (Atex Certificate Bvs 15 Atex E098X)

    767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 58.11 /Serie 767 ( WAGO-SPEED WAY)/Ei ns atz i n Ex-Bereic hen/Bes. Bed. für den sic heren Ex-Betrieb g em. ATEX-Zerti fi kat BVS 15 AT EX E098X @ 22\mod_1428493230701_21.doc x @ 179815 @ 3 @ 1 12.2.1...

  • Page 88: Special Conditions For Safe Use (Iec Ex Certificate Iecex Bvs 15.0083X)

    767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 58.13 /Serie 767 ( WAGO-SPEED WAY)/Ei ns atz i n Ex-Bereic hen/Bes. Bed. für den sic heren Ex-Betrieb g em. IEC Ex Z ertifi kat IECEx BVS 15.0083X @ 22\mod_1428493277377_21.doc x @ 179819 @ 3 @ 1 12.2.2...

  • Page 89: Appendix

    Pos : 60 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Anhang - Z ubehör Anhang - Ü bers chrift 1 @ 4\mod_1239874070437_21.doc x @ 30560 @ 1 @ 1 Appendix Pos : 61 /Serie 767 ( WAGO-SPEED WAY)/Anhang/I/O-M odule/Anhang 767-58xx Di agnos einfor mation @ 7\mod_1268133111596_21.doc x @ 52031 @ 2 @ 1 13.1...

  • Page 90: List Of Figures

    Figure 22: Removing the module (with the carrier rail adapter) from the carrier rail ..................82 Figure 23: Side Marking Example for approved WAGO SPEEDWAY 767 Series Fieldbus Coupler according to ATEX and IECEx ......85 Pos : 64 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.1.0...

  • Page 91: List Of Tables

    WAGO-SPEEDWAY 767 List of Tables 767-5401 4DIO 24V DC 0.2A HS (4xM12) Pos : 65 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1 List of Tables Table 1: Number Notation ..................
  • Page 92 List of Tables WAGO-SPEEDWAY 767 767-5401 4DIO 24V DC 0.2A HS (4xM12) Table 48: Legend for Figure “Side Marking Example for approved WAGO SPEEDWAY 767 Series Fieldbus Coupler according to ATEX and IECEx” ..................85 Table 49: Diagnostics of the module ..............89 Table 50: Diagnostics of the individual channels of the module ......
  • Page 93 WAGO-SPEEDWAY 767 List of Tables 767-5401 4DIO 24V DC 0.2A HS (4xM12) === Ende der Liste für T extmar ke Verzeic hnis_hi nten === Manual Version 1.1.0...
  • Page 94 Pos : 67 /D okumentation allgemei n/Einband/Einband H andbuc h - R üc kseite 2015 @ 9\mod_1285229376516_21.doc x @ 64944 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Hansastraße 27 • D-32423 Minden Phone: 05 71/8 87 –...

This manual is also suitable for:

767-5401

Table of Contents