Access Via Ftp; Figure 26: Connection Setup Using Ftb In The Dos Console - WAGO -SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
13.2

Access via FTP

To access the fieldbus coupler using FTP, proceed as follows:
1. Open the DOS console. Click on the start menu and select "Run". Enter the
cmd
2. In the DOS console, enter the
fieldbus coupler. In the following example, the command is:
ftp 192.168.1.100
3. To log on to FTP, enter your user name and password.
You are now logged on in FTP. You can now, for example, access the directory
with the pages of the web-based management by entering the
By means of the regular FTP commands, you have the option of copying these
pages to your PC and customizing them.

Figure 26: Connection setup using FTB in the DOS console

Pos : 50 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.2.0
command and click [OK].
command with the IP address of the
ftp
The File System 129
command.
CD U:\