Figure 23: Dip Switch Set For Instance 52 - WAGO -SPEEDWAY 767 Manual

66 Commissioning
Station name
The station name is only active when the fieldbus coupler is connected to the
power supply. The IP address configured for the fieldbus coupler is allocated
automatically by the I/O controller after fieldbus coupler identification.
In the following example, switches 3, 5 and 6 are switched on (switch 8 is off!).
Thus, the new station address of the "wago-767-1201-52" fieldbus coupler is as
follows (2

Figure 23: DIP switch set for instance 52

Pos : 27.7 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
2 4 5
+ 2 + 2 = 4 + 16 + 32 = 52).
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Manual
Version 2.2.0