Clock" View; Users" View; Table 33: Parameter Description Of The Page "Clock - WAGO -SPEEDWAY 767 Manual

74 Commissioning
7.3.7

"Clock" View

On this page, the real-time clock is configured. The time and date can only be
changed as user admin and user.
To clear your entries, click [RESET].
1.
2. To confirm your entries, click [SUBMIT].
3. Your entries are not active until the software has been reset. To reset the
software, click on "Users" in the navigation bar and then "Software reset".
You can also disconnect the power supply from the fieldbus coupler and
then reconnect it.

Table 33: Parameter description of the page "Clock"

Configuration data
Time on device
Date (YYYY-MM-DD)
Time zone
(+/- hour:minute)
Summer time
Display mode
12-hour clock
7.3.8

"Users" View

On this page, the passwords of the users admin, user and guest can be changed.
Passwords can only be changed by the admin user. An overview of passwords
can be found in section "User Administration".
1. From the "user" selection box, select the user whose password you wish to
change.
2. Enter your new password in the "New password" field.
3. Reenter the password in the "Confirm password" field to verify spelling.
To clear your entries, click [RESET].
4.
5. To confirm your entries, click [SUBMIT]. The password of the selected
user is changed.
767-1201 FC PROFINET IO 8DI 24V DC
Set the time here.
Set the date here.
Set the time zone here.
If this checkbox is activated, the WBM is set to summer time.
Switching between 12-hour and 24-hour time display.
WAGO-SPEEDWAY 767
Manual
Version 2.2.0