WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
15.1
Installing the FDT/DTM Components
The following sections deal exclusively with WAGOframe.
When using another FDT/DTM frame application, install only the USB driver
(item no.: 759-922), the Service Interface DTM (item no.: 759-371) and the
WAGO DTM (item no.: 759-361) on your computer. These can be obtained on
the Internet at www.wago.com.
Information on configuring the fieldbus coupler using WAGO DTM can be
obtained in section "Parameterizing".
1.
Insert the "WAGOframe" CD into your CD-ROM drive.
2.
The start screen appears. Select the desired installation language. A product
selection window opens. If Autostart is not activated, open the
"Language.htm" file.
Figure 31: Start screen of WAGOframe CD
3.
To install the necessary 767 programs, click on the appropriate link. A
window opens displaying the corresponding installation programs.
Manual
Version 2.2.0
Parameterization via WAGOframe
147