Table 78: Group Number 2: S-Bus Warnings - WAGO -SPEEDWAY 767 Manual

140 Diagnostics
Pos : 52.20 /Serie 767 ( WAGO-SPEED WAY)/Diag nos e/F eldbus koppler /Gruppennummer 02 - S-BU S- War nungen alle FBK @ 10\mod_1308575081274_21.doc x @ 73748 @ @ 1

Table 78: Group Number 2: S-BUS Warnings

Error code Error argument Cause
1
2
3
4
5
Pos : 52.21 /Serie 767 ( WAGO-SPEED WAY)/Diag nos e/F eldbus koppler /Gruppennummer 05, 06 - H ar dwar efehl er/-Warnungen @ 10\mod_1308721806935_21.doc x @ 73950 @ @ 1
1 Cycle time of S-BUS cannot
be applied.
Restart of S-BUS was
1
performed.
Communication on the S-
2
BUS was stopped.
Error reaction of S-BUS
3
was activated.
Invalid OPH configuration
0
255 Firmware update of I/O module
User settings for sensor-
0 ... 255
/actor delay are invalid.
WAGO-SPEEDWAY 767
767-1201 FC PROFINET IO 8DI 24V DC
Correction
Specify a higher cycle time.
-
-
-
Check the maximum configuration
definition, the configuration level
definition and the physical node
configuration.
The modules switch to the mode for
updating the firmware. In this mode,
no process data is exchanged.
Change user settings for sensor-
/actor delay.
Manual
Version 2.2.0